HP Surestore Disk Array 12h and FC60 User Manual
Hphh
Table of contents
Document Outline
- 1 Product Description
- 2 Topology and Array Planning
- 3 Installation
- Overview
- Host System Requirements
- Site Requirements
- Power Distribution Units (PDU/PDRU)
- Installing the Disk Array FC60
- Installing the Disk Enclosures
- Installing the Controller
- Configuration Switches
- Attaching Power Cords
- Attaching SCSI Cables and Configuring the Disk Enclosure Switches
- Connecting the Fibre Channel Cables
- Applying Power to the Disk Array
- Verifying Disk Array Connection
- Installing the Disk Array FC60 Software (HP-UX Only)
- Configuring the Disk Array
- Using the Disk Array FC60 as a Boot Device (HP-UX Only)
- Solving Common Installation Problems
- Adding Disk Enclosures to Increase Capacity
- 4 Managing the Disk Array on HP-UX
- Tools for Managing the Disk Array FC60
- Installing the Array Manager 60 Software
- Managing Disk Array Capacity
- Adding Capacity to the Disk Array
- Upgrading Controller Cache to 512 Mbytes
- Managing the Disk Array Using SAM
- Managing the Disk Array Using Array Manager 60
- Command Syntax Conventions
- Array Manager 60 man pages
- Quick Help
- Selecting a Disk Array and Its Components
- Preparing to Manage the Disk Array
- Checking Disk Array Status
- Managing LUNs
- Managing Global Hot Spares
- Managing Disk Array Configuration
- Managing the Universal Transport Mechanism (UTM)
- Managing Cache Parameters
- Performing Disk Array Maintenance
- Managing Disk Array Logs
- Upgrading Disk Firmware
- Managing the Disk Array Using STM
- Status Conditions and Sense Code Information
- 5 HP-UX Diagnostic Tools
- 6 Troubleshooting
- 7 Removal and Replacement
- 8 Reference / Legal / Regulatory