HP Surestore Disk Array 12h and FC60 - Manual (Page 189)

Attaching SCSI Cables and Configuring the Disk Enclosure Switches 189
Inst
alla
tion
Figure 68 Full Bus BCC Configuration Switch Settings
Segment 1 set to “1” Segment 1 set to “1” Segment 1 set to “1” Segment 1 set to “1”
Note inverted orientation from upper BCC
Note inverted orientation from upper BCC Note inverted orientation from upper BCC Note inverted orientation from upper BCC
Segment 1 set to “1” Segment 1 set to “1” Segment 1 set to “1” Segment 1 set to “1”
All other segments set to “0”
All other segments set to “0” All other segments set to “0” All other segments set to “0”
Tray ID set to unique value Tray ID set to unique value Tray ID set to unique value Tray ID set to unique value
for each enclosure
for each enclosure for each enclosure for each enclosure
Tray ID set to same value Tray ID set to same value Tray ID set to same value Tray ID set to same value
on both BCCs in the enclosure
on both BCCs in the enclosure on both BCCs in the enclosure on both BCCs in the enclosure