HP Surestore Disk Array 12h and FC60 - Manual (Page 164)

164 Installing the Disk Enclosures
C AUTION
To protect the door, do not lift or move the disk enclosure with the door open.
3. Unlock and open the disk enclosure door, using a thin flat-blade screwdriver to turn the
lock ( Figure 58 ).
Figure 58 Door Lock
4. Ensure that one hole in each mounting ear (A in Figure 57 ) aligns with the sheet metal
nuts previously installed on the rack front columns.
5. Insert two screws (A in Figure 57 ) through the matching holes in the disk enclosure
mounting ears and rack front columns. Tighten screws.
6. Close the door.