HP Surestore Disk Array 12h and FC60 - Manual (Page 241)

Installing the Array Manager 60 Software 241
M
a
na
ging
the
Di
sk
Array
on HP-UX
AM60Srvr Daemon
The AM60Srvr daemon is the server portion of the Array Manager 60 software. It monitors
the operation and performance of all disk arrays, and services requests from clients used to
manage the disk arrays. Tasks initiated from SAM or Array Manager 60 are serviced by the
AM60Srvr daemon.
The AM60Srvr daemon monitors disk array performance and status, maintains disk array
logs, initiates diagnostics, and allows clients to examine and change the disk array
configuration.
AM60Srvr must be running to allow management of the disk array using either SAM or
Array Manager 60. Because of its importance in managing the disk arrays, AM60Srvr is
launched automatically when the system is booted. Host I/Os to the disk array are not
dependent on AM60Srvr and are serviced regardless of whether AM60Srvr is running or
not.
Running Array Manager 60
Array Manager 60 runs as a daemon process (AM60Srvr) and is started automatically when
the system is started. If for some reason Array Manager 60 stop running, an error message
will be displayed when you attempt to execute any of the commands.
If you suspect that Array Manager 60 is not running, type the following command:
ps -ef | grep AM60Srvr
AM60Srvr is the Array Manager daemon and it should be displayed as running. If AM60Srvr
is not running, start it using the following command:
/opt/hparray/bin/AM60Srvr