HP Surestore Disk Array 12h and FC60 - Manual (Page 318)

318 Status Conditions and Sense Code Information
AM60: DEGRADED--REPLACED
DISK BEING REBUILT
STM: DEGRADED - 2 A rebuild is in progress on the LUN.
No action is required.
AM60: DEAD--MORE DISK
FAILURES THAN REDUNDANT
DISKS
STM: UNAVAILABLE - 4 Multiple, simultaneous disk failures have occurred on the
LUN, causing data to be inaccessible. On a RAID 5 LUN,
losing more than one disk will cause this status. On a RAID
1 or 0/1 LUN, you must lose both disks of a mirrored pair
before this status will occur.
Replace the failed disks.
AM60: DEAD--FORMAT IN
PROGRESS
STM: BINDING A formatting operation (writing zeros) is in progress on a
DEAD LUN. This occurs while the LUN is being bound.
No action is required.
AM60: UNDEFINED
STM: DEGRADED - 83 OR
UNAVAILABLE - 83 This state indicates a drive failure during a LUN binding
process. If a hot spare has been designated, the LUN state
should transition to Optimal once the LUN binding is
complete. If no hot spare is in place, the LUN state should
transition to Degraded--Waiting for Repair Action
(Degraded--1), once the binding is complete.
AM60: DEAD--CREATION IN
PROGRESS
STM: UNAVAILABLE - 84 A formatting operation has been queued for this LUN, but
has not started yet.
No action is required.
AM60: DEAD--WRONG DISK
REMOVED OR REPLACED
STM: UNAVAILABLE - 116 The wrong disk was removed from a degraded LUN.
Reinstall the disk.
AM60: INACCESSIBLE:POSSIBLY
NO DEVICE FILE
STM: UNAVAILABLE - 254 The special device files are not installed on the LUN.
Run insf -e on the LUN.
AM60: UNDEFINED
STM: UNAVAILABLE - xxx The LUN is in an unknown state.
Contact your service representative.
Table 40 LUN Status Conditions (cont’d)
Status Definition/Action