HP Hitachi Dynamic Link Manager Software - Manual (Page 94)

3. Creating an HDLM Environment
72
HDLM Drivers.
2. Execute the following command to reconfigure the HDLM device:
# cfgmgr
When the NPIV option is set to
on
, HBA adapter number and bus number for
PathName
, which are output by HDLM command
view
operations, are changed
to adapter type and adapter number respectively.
The
view
operation parameters for which the above changes are to be applied are
as follows:
•
-path
parameter (displays path information)
•
-lu
parameter (displays LU information)
•
-hba
parameter (displays HBA port information)
For details on the
view
operations, see 6.7 view (Displays Information).
3.4.4 Notes on a License Key
„ A license key is required when performing any of the following types of
installation:
• Performing a new installation of HDLM.
• Migrating from HDLM version 5.8.1 or earlier to version 5.9 or later.
• Upgrading or re-installing HDLM after the valid license period has expired.
„ To update the HDLM license, specify the
-lic
parameter in the HDLM
command's
set
operation, and then execute this command. The license key type
determines the expiration of the license key. For details about license key types
and the
set
operation, see 6.6 set (Sets Up the Operating Environment).
3.4.5 Notes on Trace Files
In HDLM 5.6 or later, trace files for versions of HDLM earlier than 5.6 are divided
into integrated trace files and trace files. The logs for the HDLM command are output
to integrated trace files. Trace information for an HDLM manager is output to trace
files. The output destinations for the files are changed as follows:
When you migrate from HDLM 04-00 or earlier
Trace files before the migration:
/opt/hitachi/HNTRLib/spool/
hntrn.log
(n indicates a file number)
Integrated trace files after the migration:
/var/opt/hitachi/HNTRLib2/
spool/hntr2n.log
(n indicates a file number)
Trace files after the migration:
/var/DynamicLinkManager/log/
hdlmtrn.log
(n indicates a file number)