HP Hitachi Dynamic Link Manager Software User Manual
Page 392

8. Messages
370
None.
KAPL01101-W
The target HBA port was not found. Operation name =
aa...aa
Details
The HBA having the HBA_ID specified in the
-hbaid
parameter could not be
found.
aa...aa:
offline
,
online
Action
Use the view operation of the HDLM command (
dlnkmgr view -hba
) to check
the target HBA port and the HBA_ID of the target HBA port. After that, specify
the appropriate HBA_ID, and then retry.
KAPL01102-I
All the paths which pass the specified
aa...aa
port will be changed
to the Offline(C) status. Is this OK? [y/n]:
Details
Multiple paths will be collectively placed Offline(C) because the
-hbaid
or
-chaid
parameter was specified. To collectively place multiple paths Offline(C),
enter
y
. To not collectively place them Offline(C), enter
n
.
aa...aa: CHA, HBA
Action
If you want to execute the offline processing for the paths which pass the specified
target, enter
y
. If you want to terminate the processing, enter
n
.
KAPL01103-I
If you are sure that there would be no problem when all the paths
which pass the specified
aa...aa
port are placed in the Offline(C)
status, enter y. Otherwise, enter n. [y/n]:
Details
This message re-asks the user whether to place all the paths Offline(C). To place
all the paths Offline(C), enter
y
. To not place them Offline(C), enter
n
.
aa...aa: CHA, HBA
Action
If you want to execute the offline processing for the paths which pass the specified
target, enter
y
. If you want to terminate the processing, enter
n
.
KAPL01104-I
All the paths which pass the specified
aa...aa
port will be changed
to the Online status. Is this OK? [y/n]: