HP Hitachi Dynamic Link Manager Software - Manual (Page 426)

8. Messages
404
use the output name, use the output command to overwrite or re-install.
KAPL09135-E
One of the following was executed at the same time as an HDLM
command set -lic operation: another set -lic operation, or an
update of the license for an update installation.
Action
Check the license by using the HDLM command's
view -sys -lic
operation.
Then, if necessary, update the license by using the
set -lic
operation during
or after installation. If the same error message is output, contact your HDLM
vendor or the maintenance company if there is a maintenance contract for HDLM.
Do not perform the following operation:
Execution of the HDLM command's
set -lic
operation simultaneously with an
update of the license for an upgrade installation
KAPL09142-E
HDLM
aa...aa
cannot be performed. Wait a while, and then perform
aa...aa
again. Error Code =
bb...bb
Details
HDLM cannot be installed or uninstalled.
aa...aa: "installation" or "uninstallation"
bb...bb: Internal code (decimal (base-10) number)
Action
Wait a while, and then reperform the installation or uninstallation. After the
installation or uninstallation has finished, use the backup acquired in advance and
specify the HDLM settings.
KAPL09143-E
HDLM
aa...aa
cannot be performed. Error Code =
bb...bb
Details
HDLM cannot be installed or uninstalled.
aa...aa: "installation" or "uninstallation"
bb...bb: Internal code (decimal number)
Action
Contact your HDLM vendor or the maintenance company if there is a
maintenance contract for HDLM.