HP Hitachi Dynamic Link Manager Software - Manual (Page 299)

6. Command Reference
277
#
Because both
PathID
and
Status
are always displayed, you do not have to
specify any parameters.
In the sub-parameters following
-path -item
, you can list the paths (
-hdev
)
and sort the list (
-srt
). If you omit both parameters, the command displays
information for all the paths in ascending order of AutoPATH_IDs.
These sub-parameters are:
-hdev
host-device-name
Displays information only for the paths accessing the specified host device.
Specify hdisk name for host-device-name.
The host-device-name string is case sensitive.
When you specify this parameter,
HDevName
is displayed by default.
Therefore, it is not necessary to specify
hd
for the
-item
parameter.
-stname
Use this parameter to display the model ID of the storage system in the
product ID element of the
DskName
field. When this parameter is omitted,
the command displays the product ID or emulation type of the storage system
instead.
For details about the information displayed for product IDs, see
Table 6-14: Product ID Displayed by the View -Path Operation.
When you use this parameter,
DskName
is displayed by default. Therefore,
it is not necessary to specify
dn
for the
-item
parameter.
-srt {pn|lu|cp}
Use this parameter to sort the path information in ascending order, according
to the specified sorting keys.
The sorting keys are as follows: the first sorting key is the name of the
IO-Errors ie
DNum dnu
HDevName hd
IEP iep
Selectable items Sub-parameters