HP Hitachi Dynamic Link Manager Software - Manual (Page 309)

6. Command Reference
287
When a summary is displayed by specifying the
-path -c
parameter and there
are 11 or more characters in the summary string, any characters after the 9th
character are not displayed,and ellipsis (
...
) are displayed instead.
(3) To Display LU Information
When displaying LU information, if the
-item
parameter,
-c
parameter, or the
-c
-item
parameter is specified at the same time as the
-lu
parameter, you can add and
display items and display a summary of LU information. This section describes each
parameter and the LU information and displayed items.
To display LU information
-lu
When neither the
-c
nor
-item
parameter is specified with the
-lu
parameter,
the information about the LU recognized by HDLM is displayed without selecting
items to be displayed or displaying a summary. The sorting key is iLU and its
configuration information is displayed for each LU.
By using the subsequent parameter (
-hdev
or
-pathid
), you can filter the LU
information to be displayed. If you do not specify
-hdev
or
-pathid
, the
information about all LUs recognized by HDLM is displayed. For details on the
contents of each displayed item, see Table 6-17: Displayed LU Information.
The subsequent parameters are:
-hdev
host-device-name
Filters the information only for the paths accessing the specified host device.
Specify hdisk name for host-device-name.
The host-device-name string is case-sensitive.
-pathid
AutoPATH_ID
Use this parameter to display only the information about the LU that is
connected to the path with that specified AutoPATH_ID.
-t
Omits the title for each information item.
Example
The following example shows how to display the LU information without
selecting items to be displayed:
# /usr/DynamicLinkManager/bin/dlnkmgr view -lu
Product : USP
SerialNumber : 0014010
LUs : 10