HP Hitachi Dynamic Link Manager Software - Manual (Page 143)

3. Creating an HDLM Environment
121
# /usr/DynamicLinkManager/bin/dlmrmdev
Check the file names for odm-environment-settings-file-name and
set-environment-setting-file-name, and then perform this procedure again from
step 17, specifying the correct file names in the command.
21. Delete the
odm
environment settings file and the
set
environment settings file.
# rm -r /tmp/
any-desired-directory-that-stores-odm-environment-settings-file
# rm -r /tmp/
any-desired-directory-that-stores-set-environment-setting-file
22. Perform the procedure described in (1) When Installing HDLM in a Local Boot
Disk Environment in 3.5.3 Performing a New Installation of HDLM, starting
from step 14.
23. If you performed step 5, restore the volume group you backed up.
# restvg -f
any-desired-file-name-or-device-name hdisk-name
24. Check the path configuration according to the steps described in 3.6 Checking the
Path Configuration.
25. Unmount the DVD-ROM.
# umount /
cdrom
26. Delete any mount directory you may have created in step 11.
# rm -r /
cdrom
3.5.7 Installing HDLM in an HACMP Environment
This subsection explains how to install HDLM when you are running HACMP
services.
(1) Upgrading or Re-installing HDLM in an HACMP Environment (in a Local Boot
Disk Environment)
Because HDLM version 5.8.1 or earlier cannot be upgraded to HDLM version 5.9 or
later, migration is necessary. For details about migration, see (3) Migrating HDLM in
an HACMP Environment.
For details about setting up HACMP, see the HACMP documentation.