HP Hitachi Dynamic Link Manager Software - Manual (Page 274)

6. Command Reference
252
KAPL01001-I The HDLM command completed normally.
Operation name = set, completion time = yyyy/mm/dd
hh:mm:ss
#
-elfs
error-log-file-size
Specify a value from
100
to
2000000
(KB) for the size of the error log files
(
dlmmgr
n
.log
(n indicates a file number from
1
to
16
)). The specified value is
used for HDLM manager logs.
By specifying both the log file size and the number of log files, you can collect up
to 32,000,000KB (approximately 30 GB) of error logs in total.
When the size of all the log files in a log file group reaches their maximum value,
the new log data will overwrite the existing log data data, starting with the oldest
log data.
-elfn
number-of error-log-files
Specify the number of error log files (
dlmmgr
n
.log
(n indicates a file number
from
1
to
16
)). Specify a value from
2
to
16
.
By specifying both the log file size and the number of log files, you can collect up
to 32,000,000KB (approximately 30GB) of error logs in total.
-systflv
trace-level
Specify the trace output level.
The trace files for which trace levels can be set are
hdlmtr
n
.log
(n indicates a
file number from
1
to
64
).
Table 6-4: Trace Level Values shows the values of the trace level. If an error
occurs, set the trace level to 1 or higher to collect the log information.
Table 6-4: Trace Level Values
The higher the error log collection level value, the more log information will be
output. As the amount of log information that is output increases, the amount of
Value Description
0
Does not output any trace.
1
Only outputs error information.
2
Outputs a summary of program operation.
3
Outputs details of program operation.
4
Outputs all information.