HP Hitachi Dynamic Link Manager Software - Manual (Page 107)

3. Creating an HDLM Environment
85
installation of HDLM continues, but installation of HDLM components has
failed. After installing HDLM, resolve the problem according to the
KAPL09241-W
message if necessary.
9. Execute the following command to make sure that the package is installed.
# lslpp -la DLManager.mpio.rte
Make sure that the fileset item in the output listing contains
DLManager.mpio.rte
, and all the displayed statuses are
COMMITTED
.
If one or more of the displayed statuses are
BROKEN
, uninstall and then re-install
HDLM.
10. Unmount the DVD-ROM.
# umount /
cdrom
11. Delete the created mount directory.
# rm -r /
cdrom
12. As required, execute the
dlmodmset
utility for setting the HDLM execution
environment ODM.
For details, see 7.7 dlmodmset Utility for Setting the HDLM Execution
Environment ODM.
13. Execute the following command to configure the hdisk:
# cfgmgr
If the hosts and storage systems are connected by a Fibre Channel switch, perform
steps 14 to 18. If the hosts and storage systems are not connected by a Fibre
Channel switch, go to step 19.
14. Finish defining the parent device (
fscsi
n).
# rmdev -l fscsin -R
Note that you can use the following command to check the parent device:
# lsdev -C -l
hdisk-name
-F 'parent'