HP Hitachi Dynamic Link Manager Software User Manual
Page 407
8. Messages
385
8.5 KAPL05001 to KAPL06000
KAPL05003-I
The HDLM driver (filter component) was successfully attached to
Disk (
aa...aa
), Partition (
bb...bb
).
Details
The path corresponding to
Disk
(aa...aa: Disk sequence number) and
Partition
(bb...bb: Fixed at 0) was successfully registered in the core logic.
Action
None.
KAPL05008-E
Could not allocate memory. (
aa
:
bb
) Execute the DLMgetras utility
to collect error information, and then contact your vendor or
maintenance company. Refer to the HDLM User's Guide for
instructions how to execute the DLMgetras utility.
Details
The OS memory allocation function was started but an error was returned from
the memory allocation function.
aa...aa: Number of program lines
bb...bb: Memory capture size
Action
Check whether the HDLM driver has started normally. If it has not started or
contains an error, execute the
DLMgetras
utility for collecting HDLM error
information, and then contact your HDLM vendor or the maintenance company
if there is a maintenance contract for HDLM. For details on the
DLMgetras
utility, see 7.2 DLMgetras Utility for Collecting HDLM Error Information.
KAPL05011-E
Could not attach the HDLM driver (filter component) to Disk (
aa
),
Partition (
bb
). (
cc
:
dd
) Execute the DLMgetras utility to collect
error information, and then contact your vendor or maintenance
company. Refer to the HDLM User's Guide for instructions how to
execute the DLMgetras utility.
Details
Registration of the path corresponding to
Disk
(aa...aa: physical volume (hdisk)
decimal sequence number) and
Partition
(bb...bb: Partition decimal number)
failed in the core logic.