HP Hitachi Dynamic Link Manager Software - Manual (Page 349)

7. Utility Reference
327
parameter.
Note
When this parameter is set to
on
, I/O access to the Online(E) path will be
suppressed, so I/O success will automatically change the path to the Online
status. To recover the path, use an
online
command or the auto failback
function.
-v { on | off }
Enables or disables the NPIV option.
on
: Enable
off
: Disable
The default is
off
.
To use HDLM in a client partition to which a virtual HBA is applied by using the
NPIV functionality of the virtual I/O server, specify
on
. For details, see
3.4.3 Notes on the Virtual I/O Server.
-s
Prevents the confirmation message from being displayed when the utility is
executed.
-o
Displays the current setting information.
-h
Displays the format of the
dlmodmset
utility.
Examples
In the following example, the utility enables the LUN RESET option:
# /usr/DynamicLinkManager/bin/dlmodmset -r on
KAPL10805-I The setup of the HDLM execution environment ODM
will be changed. Lun Reset = on. Is this OK? [y/n]:y
KAPL10800-I The dlmodmset utility completed normally.
In the following example, the utility displays the current setting information:
# /usr/DynamicLinkManager/bin/dlmodmset -o
Lun Reset : off
Online(E) IO Block : on
NPIV Option : off
KAPL10800-I The dlmodmset utility completed normally.
#
In the following example, the utility displays Help: