HP Hitachi Dynamic Link Manager Software User Manual
Page 112

3. Creating an HDLM Environment
90
The
KAPL10529-I
message is displayed.
If the
KAPL10529-I
message is not displayed, the HDLM management-target
device has not been deleted. Make sure that no processes, services, file systems,
or volume groups are using any HDLM management-target paths, and then
re-execute the above utility.
Note that an hdisk recognized as a boot disk will not be deleted.
7.
Execute the following command to make sure that the hdisks recognized as the
devices to be managed by HDLM have been deleted:
# lsdev -Cc disk
8.
Prepare the license key or license key file.
• When only the license key has been provided
Create the
/var/DLM
directory, and then, in this directory, create the license
key file (
dlm.lic_key
). The following shows an example when the license
key is
123456789ABCDEF
:
# mkdir /var/DLM
# echo "123456789ABCDEF" > /var/DLM/dlm.lic_key
• When the license key file has been provided
Store the license key file directly under the
/var/tmp/
directory by using
the
hdlm_license
name.
/var/tmp/hdlm_license
Note that the
hdlm_license
and
dlm.lic_key
files are deleted after
installation finishes successfully.
9.
Execute the following command:
• When installing HDLM from the DVD-ROM
# /
directory-in-which-the-DVD-ROM-is-mounted
/installux.sh
or
# installp -aXgd
/directory-in-which-the-DVD-ROM-is-mounted
/
HDLM_AIX all
• When installing HDLM from the directory to which the DVD-ROM was
copied
# /
directory-copied-from-DVD-ROM
/installux.sh