HP Hitachi Dynamic Link Manager Software - Manual (Page 462)

8. Messages
440
Action
If a message with
Error Code = 35
is output, check for the hdisk was deleted.
If the hdisk was deleted, recover the state of the hdisk and then retry. If the
KAPL10648-E message has been issued but the hdisk was not deleted, contact
your HDLM vendor or the maintenance company if there is a maintenance
contract for HDLM.
If a message with
Error Code = 36
is output, check for a path error. If there is a
path error, restore the path status and then retry. If the KAPL10648-E message has
been issued but there is no path error, contact your HDLM vendor or the
maintenance company if there is a maintenance contract for HDLM.
KAPL10649-E
aa...aa:
An attempt to perform Reservation Key clear processing has
failed. Make sure that an error has not occurred in the
HDLM-management target device, and that the device can be
managed by HDLM. If either of the above conditions are not met,
execute the DLMgetras utility to collect error information, and
then contact your vendor or maintenance company. Refer to the
HDLM User's Guide for instructions how to execute the DLMgetras
utility.
Details
An attempt to perform Reservation Key clear processing has failed.
aa...aa: Hdisk name
Action
Make sure that an error has not occurred in the HDLM-management target device,
and that the device can be managed by HDLM. If either of the above conditions
are not met, contact your HDLM vendor or the maintenance company if there is
a maintenance contract for HDLM.
KAPL10650-I
aa...aa
: NO RESERVATION
Details
A LU has not been reserved.
aa...aa: Hdisk name
Action
None.
KAPL10651-I
The user terminated the operation.
Details