HP Hitachi Dynamic Link Manager Software - Manual (Page 113)

3. Creating an HDLM Environment
91
or
# installp -aXgd /
directory-copied-from-DVD-ROM
/HDLM_AIX all
Even though a message asking you to restart the host is displayed during
installation, you do not have to restart the host.
If the KAPL09172-E message is displayed, the hdisk for the device that is
managed by HDLM still remains. Re-execute the procedure starting from step 6.
During installation, the
KAPL09241-W
message might be output. In this case,
installation of HDLM continues, but installation of HDLM components has
failed. After installing HDLM, resolve the problem according to the
KAPL09241-W
message if necessary.
10. Execute the following command to make sure that the package is installed.
# lslpp -la DLManager.mpio.rte
Make sure that the fileset item in the output listing contains
DLManager.mpio.rte
, and all the displayed statuses are
COMMITTED
.
If one or more of the displayed statuses are
BROKEN
, uninstall and then re-install
HDLM.
11. Unmount the DVD-ROM.
# umount /
cdrom
12. Delete the created mount directory.
# rm -r /
cdrom
13. Connect cables to all HBAs to change the configuration to a multi-path
configuration.
Do not execute the
cfgmgr
command.
14. Execute the following command to restart the host:
# shutdown -Fr
15. Make sure that the boot disk is in a multi-path configuration:
# lspath -l hdisk10 -s available
Available hdisk10 fscsi0
Available hdisk10 fscsi1
...