HP Hitachi Dynamic Link Manager Software User Manual
Page 191

3. Creating an HDLM Environment
169
If you are not using a virtual I/O server, uninstallation of HDLM is complete and
you do not need to perform the remaining steps.
If the
KAPL09022-E
message is displayed, the hdisks recognized as the devices
to be managed by HDLM still remain. Re-execute the procedure starting from
step 14.
21. If you are using a virtual I/O server, define an hdisk as a virtual target device.
On the virtual I/O server, execute one of the following commands:
• To create an hdisk as a virtual target device
$ mkvdev -vdev
hdisk-name
-vadapter
virtual-SCSI-server-adapter-name
• To create a logical volume as a virtual target device
$ mkvdev -vdev
logical-volume-name
-vadapter
virtual-SCSI-server-adapter-name
22. Execute the following command in the client logical partition to reconfigure the
device:
# cfgmgr
23. Execute the following command in the client logical partition to check that the
physical volume has been recognized as hdisk:
# lsdev -Cc disk
Check that the following execution result is displayed:
hdisk1 Available Virtual SCSI Disk Drive
24. Execute the following command to restore the backed up volume group:
# restvg -f
any-desired-file-name-or-device-name hdisk-name
(2) When Uninstalling HDLM in the Boot Disk Environment
1.
Log in to AIX as a user with root permissions.
If you are using a virtual I/O server, see the virtual I/O server documentation for
details about how to log in to AIX.
If you are not using a virtual I/O server, proceed to step 9.