HP Hitachi Dynamic Link Manager Software - Manual (Page 225)

4. HDLM Operation
203
# bootlist -m normal hdisk0 hdisk1
4. Make sure that the boot disk is configured with the specified number of paths.
The following shows an example of executing the command:
# bootlist -m normal -o
hdisk0 blv=hd5
hdisk0 blv=hd5
hdisk1 blv=hd5
...
(3) Deleting a Path (of a Volume Group Other than rootvg)
The following shows an example of deleting a path of a volume group other than
rootvg.
1.
Execute the following HDLM command to check the OS management path ID of
the path that is to be deleted and to determine the devices (hdisk name) connected
to the path.
# /usr/DynamicLinkManager/bin/dlnkmgr view -drv
PathID HDevName OSPathID LDEV
000000 hdisk5 00000 USP.0014050.0065
000001 hdisk5 00001 USP.0014050.0065
000002 hdisk5 00002 USP.0014050.0065
000003 hdisk10 00000 9500V.5457.0102
000004 hdisk10 00001 9500V.5457.0102
000005 hdisk10 00002 9500V.5457.0102
For each path ID (
PathID
column), check the entries in the
HDevName
and
OSPathID
columns. In the following steps, device-name and OS-management-
path-ID refer to the
HDevName
and
OSPathID
items, respectively, that you
checked in this step.
2. Execute the following command to check the parent device and connection of the
path to be deleted:
Specify the device-name checked in step 1 in executing the following command:
# lspath -Hl
device-name
-F "name path_id parent connection"
When
hdisk10
is specified, the command and the execution results would be as
follows: