HP Hitachi Dynamic Link Manager Software - Manual (Page 147)

3. Creating an HDLM Environment
125
3.5.8 Performing an Unattended Installation of HDLM
This subsection explains how to install HDLM using the
installhdlm
utility. The
unused capacity required to execute the
installhdlm
utility is as follows:
•
/tmp
directory
100 KB
• Any log output directory that can be specified by users (the default directory is
/
var/tmp
)
200 KB
(1) When Installing HDLM in a Local Boot Disk Environment
To install HDLM in a local boot disk environment:
1.
Log in to AIX as the root user.
If you are using a virtual I/O server, see the virtual I/O server documentation to
log in to AIX.
2. Insert the DVD-ROM.
If you are installing HDLM from a directory in which files on the DVD-ROM are
copied, make sure that the file organization has not been changed. If the file
organization has changed, the
installhdlm
utility might not function correctly:
# mkdir /
cdrom
# mount -r -v cdrfs /dev/cd0 /
cdrom
# mkdir /tmp/hdlm
# cp -rp /
cdrom
/HDLM_AIX /tmp/hdlm/
# cp -p /cdrom/installux.sh /tmp/hdlm/
If you copied the files on the DVD-ROM to your desired directory, proceed to step
5.
3. If there is no directory for mounting the DVD-ROM, make the directory.
# mkdir /
cdrom
cdrom is the desired directory name. Hereafter, cdrom is used for purposes of
explanation.
4. Mount the DVD-ROM.
# mount -r -v cdrfs /dev/cd0 /
cdrom