HP Hitachi Dynamic Link Manager Software - Manual (Page 212)

4. HDLM Operation
190
KAPL01049-I Would you like to execute the operation? Operation
name = set [y/n]: y
KAPL01071-I A permanent license was installed.
#
4.2.10 Viewing HDLM Version Information
This section explains how to display HDLM version information.
To display HDLM version information, execute the
dlnkmgr
command's
view
operation with the
-sys
parameter specified. The following shows an example in
which the command is executed:
# /usr/DynamicLinkManager/bin/dlnkmgr view -sys
HDLM Version : x.x.x-xx
Service Pack Version :
Load Balance : on(extended lio)
Support Cluster :
Elog Level : 3
Elog File Size (KB) : 9900
Number Of Elog Files : 2
Trace Level : 0
Trace File Size(KB) : 1000
Number Of Trace Files : 4
Path Health Checking : on(30)
Auto Failback : on(60)
Intermittent Error Monitor : off
HDLM Manager Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
HDLM Alert Driver Ver WakeupTime ElogMem Size
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss 4000
HDLM Driver Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
#
The value displayed in
HDLM version
indicates the HDLM version.
4.2.11 Viewing HDLM Component Information
This section explains how to display HDLM component information.
To display HDLM component information, execute the
dlnkmgr
command's
view
operation with the
-sys
parameter specified. The following shows an example in