HP Hitachi Dynamic Link Manager Software - Manual (Page 82)

3. Creating an HDLM Environment
60
„ HTC_ODM 5.0.52.1 or later
If you are using the following storage systems, use HTC_ODM 5.0.52.1 or later:
• Hitachi AMS2000/AMS/WMS/SMS series
• Hitachi USP (excluding the HP XP series)
• Lightning 9900V series (excluding the HP XP series)
• Thunder 9500V series
• Universal Storage Platform V/VM (excluding HP XP20000 and HP
XP24000)
• Hitachi Virtual Storage Platform
Note:
When you install HTC_ODM in an HDLM environment where XP_ODM
has already been installed, install HTC_ODM, and then re-install HDLM.
„ XP_ODM 5.0.52.1 or later
If you are using the following storage systems, use XP_ODM 5.0.52.1 or later:
• HP XP series
• P9500
Note:
When you install XP_ODM in an HDLM environment where HTC_ODM
has already been installed, install XP_ODM, and then re-install HDLM.
„ JDK required for linkage with Global Link Manager
To link with Global Link Manager, make sure that JDK package 1.4.2 (32-bit
version) or later, JDK package 5.0 (32-bit version) or later, or JDK package 6.0
(32-bit version) or later is already installed on the host. The JDK does not need to
be installed if linkage with Global Link Manager is not used. When HDLM is
installed in an environment in which the JDK has not been installed, the
KAPL09241-W message is displayed. If linkage with Global Link Manager is not
used, this message requires no action. Note that the display of the KAPL09241-W
message does not affect HDLM operation.
3.1.2 Storage Systems Supported by HDLM
(1) Storage Systems
HDLM supports the following storage systems:
• Hitachi Universal Storage Platform V
• Hitachi Universal Storage Platform VM