HP 3PAR Operating System Software - Manual (Page 85)

Fibre Channel Settings
1. To assign available WWNs:
a.
Select one or more WWNs from the Available WWNs list. This list displays WWNs for
all physically connected host paths not already assigned to hosts.
b. Click the left arrow to add the selected WWN(s) to the Assigned WWNs list.
2. To assign new WWNs, enter the WWN(s) for the host in the New WWN text box and click
Assign.
3. Click Next, or click Finish to close the wizard and create the host with the information entered.
iSCSI Settings
1. In the iSCSI Host Paths group box:
a.
Select one or more iSCSI names from the Available iSCSI Names list. This list displays
iSCSI names for all physically connected host paths not already assigned to hosts.
b. Click the left arrow to add the selected iSCSI name(s) to the Assigned iSCSI Names list.
c. To assign new iSCSI names, enter the iSCSI name(s) in the New iSCSI Name text box and
click Assign.
NOTE: Rules for the CHAP group box in the following step are as follows:
•
When clicking the Initiator CHAP check box, CHAP Name is initialized with the host
name (default).
•
The Target CHAP check box is enabled when the Initiator CHAP check box is selected.
•
The CHAP Secret text box is required if a CHAP Name is entered.
•
Target CHAP is optional.
•
Target CHAP can only be populated if Initiator CHAP is populated.
2. In the CHAP group box:
a.
Click the Initiator CHAP check box. The CHAP Name text box displays the host name.
b. Enter a secret/password in the CHAP Secret text box.
c. If the CHAP Secret text box is entered in hexadecimal, click the Hex check box.
d. If required, click the Target CHAP check box. The CHAP Name text box displays the system
name.
e. Enter a secret/password in the CHAP Secret text box.
3. Click Next to view summary information, or click Finish to close the wizard and configure the
host with the information gathered.
Summary
Review the summary information, then click Finish.
Editing Hosts
To edit a host, access the Edit Host wizard:
1.
Click Hosts in the Manager Pane.
2. In the Management Tree, click Hosts under the system where the host you wish to edit resides.
3. Click the Hosts tab in the Hosts screen.
4. Right-click the host you wish to edit and then click Edit Host in the menu that appears.
The Edit Host wizard appears.
Editing Hosts 85