Path summary tab – HP 3PAR Operating System Software User Manual
Page 100
The following information is provided on the Active VLUNs tab:
Description
Column
The exported LUN value. Each LUN is a link to the
.
LUN
The domain in which the VLUN belongs.
Domain
The exported volume. Each virtual volume is a link to the virtual volume tab.
Virtual Volume
The volume's RAID type.
RAID Type
The name of the host to which the VLUN is exported.
Host
The port to which the path is connected (in node:slot:port format).
Port
The host's World-Wide Name (WWN) or iSCSI name.
Host WWN/iSCSI Name
The size of the VLUN (in GiB).
Exported Size
The VLUN type.
Type
Path Summary Tab
The following information is provided on the Path Summary tab:
Description
Column
The exported LUN value.
LUN
The exported volume.
Virtual Volume
The name of the host to which the VLUN is exported.
Host
The number of host ports.
Host Ports
WWNs reported by the host, but not visible to the system.
Inactive Ports
The number of system ports that can see the host.
Storage Systems Ports
The total number of available distinct paths between the host and the system.
Available Paths
The number of paths seen by the system and reported "good" by the host.
Healthy Paths
The multipathing method in use.
Multipath
The failed path monitoring method.
Failed Policy Path
The monitoring interval in seconds after which the host checks for failed paths.
Monitoring Interval
The device name for the selected VLUN on the host.
Host Device Name
100 Managing Hosts