HP 3PAR Operating System Software - Manual (Page 305)

Viewing Drive Cage SFPs
To view the Drive Cage SFP information:
1.
Access the Drive Cages screen.
2. In the list pane, click the SFPs tab.
The list pane of the SFPs tab displays summary SFP information. The detail pane of the SFPs tab
displays detailed information about a selected SFP from the list pane.
The following information appears in the line page:
Description Column
The position in the drive cage. Cage
Interface card number, as assigned by the system. Interface Card
SFP number, as assigned by the system. SFP
The drive cage state. See “System and Component Status Icons” (page 409) . State
The SFP manufacturer. Manufacturer
The maximum speed of the SFP in Gbps. Max Speed
Displays whether the transmit laser is disabled. TX Disable
Displays whether the transmit laser has a problem. TX Fault
Displays whether the receive end of the SFP is experiencing a loss of signal from the
host or drive cage. RX Loss
Displays whether the SFP receive power is low. RX Power Low
Displays whether the SFP is DDM-capable (Digital Diagnostic Monitoring). DDM Support
Viewing Drive Cages 305