Path summary tab – HP 3PAR Operating System Software User Manual
Page 168
Description
Column
The name of the host to which the VLUN is exported.
Host
The Storage Server port on which the VLUN is exported.
Port
The WWN or iSCSI name of the port.
WWN/iSCSI Name
The VLUN's exported size (in GiB).
Exported Size
The VLUN type: Host Sees, Host In Set, or Matched Set.
Type
Path Summary Tab
The following information is displayed in the Path Summary tab:
Description
Column
The exported Logical Unit Number (LUN) value.
LUN
The name of the exported virtual volume.
Virtual Volume
The name of the host to which the VLUN is exported.
Host
The number of host WWNs visible to the Storage Server.
Host Ports
WWNs reported by the host, but not visible to the Storage Server.
Inactive Ports
The number of system ports that can see the host.
Storage System Ports
The total number of distinct, available paths between the host and the system.
Available Paths
The number of paths seen by the system reported good by the host.
Healthy Paths
The used multi-pathing method.
Multipath
The failed path monitoring method.
Failed Path Policy
The monitoring interval in seconds after which the host checks for failed paths.
Monitoring Interval
The device name for the selected VLUN on the host.
Host Device Name
168 Viewing Virtual Volumes