Summary, Editing an ao configuration, Deleting ao configurations – HP 3PAR Operating System Software User Manual
Page 177: Starting an ao configuration, Viewing an ao configuration
4.
If you wish to analyze the potential data region movement without running the AO
configuration, select Analyze Only.
NOTE:
An AO license is required in order to perform the actual tuning and optimization.
If no AO license is present on the array, only an analysis of potential optimization can be
performed.
5.
In the Measurement Interval groupbox, enter the Start time to begin analyzing the tiered CPGs.
The analysis will begin the specified number of hours or days prior to the scheduled AO
configuration. To determine an appropriate number of hours, consider the amount of time the
performance of the tiered CPGs is important; for example, 3 hours at the end of each business
day
6.
Enter the time to End analyzing the tiered CPGs. The analysis will end the specified number
of hours or days prior to the scheduled AO configuration.
7.
If you selected Create Schedule:
a.
In the Schedule groupbox, enter a Name for the schedule.
b.
If you wish to be alerted if the task fails, select Generate alert if task fails.
c.
Select the recurrence schedule as shown in
“The Common Schedule Panel” (page 351)
8.
Click Next to go to the Summary page.
Summary
Review the summary information, then click Finish.
Editing an AO Configuration
To edit an existing AO configuration:
1.
Access the AO Configurations tab in the Management Window.
2.
Right-click on the name of the AO configuration you wish to edit. then select Edit from the
menu list.
The Edit AO Configuration dialog box appears.
3.
You may change the Name, Mode, and/or up to two CPGs.
NOTE:
Data moves resulting from your configuration changes can impact performance.
4.
Click OK to accept the changes.
Deleting AO Configurations
To delete an AO configuration:
1.
Access the AO Configurations tab in the Management Window.
2.
Right-click on the name of the AO configuration you wish to delete. then select Remove from
the menu list. All schedules associated with this AO configuration will also be removed.
The Remove AO Configuration(s) confirmation dialog will appear.
3.
Click OK.
Starting an AO Configuration
To start an AO configuration, follow the instructions in
, select Run Now,
then enter the Measurement Duration.
Viewing an AO Configuration
To view an AO Configuration:
1.
Click on Provisioning in the Manager pane.
Managing AO Configuration 177