beautypg.com

General, Iscsi, General iscsi – HP 3PAR Operating System Software User Manual

Page 21

background image

General

1.

(Optional) Click the

icon to view your settings details in a pane to the right of the screen.

The details will update automatically as you enter your settings.

2.

Select a System name from the list.

3.

Select the Port you want to configure from the list.

4.

Select the Protocol.

5.

Follow the instructions for the selected protocol:

“iSCSI” (page 21)

iSCSI

To configure an iSCSI port:
1.

Select Obtain an IP address automatically or Use the following IP address.

2.

If you selected Obtain an IP address automatically, skip the following step.

3.

If you selected Use the following IP address, enter the IP Address, Subnet Mask, and Gateway
address to use for the port.

4.

Select an MTU (maximum transmission units) value from the list.

Configuring Ports

21

This manual is related to the following products:
See also other documents in the category HP Storage: