Virtual volumes, Summary, Starting remote copy groups – HP 3PAR Operating System Software User Manual
Page 203: Stopping remote copy groups, Syncing remote copy groups, Virtual volumes summary
3.
Click Next to configure Virtual Volumes or Finish.
Virtual Volumes
1.
In the Source volume on list, select a source virtual volume from the virtual volume list.
2.
In the Backup Volume on list select a backup virtual volume from the virtual volume list, or click
New to create a new backup volume.
3.
If you clicked New:
a.
Enter a volume name.
b.
Select CPG for the user space.
c.
Select a CPG for the copy space.
NOTE:
When selecting volumes, you can filter the lists to include by clicking the down
arrow and selecting Virtual Volumes, Provisioning, and Virtual Size. To clear the filter, click
Clear.
4.
Click Add.
5.
Click Next.
NOTE:
If an RW snapshot is added to the group all RW of the same volume family will be
removed. The base parent will also be removed.
NOTE:
If you are creating a Remote Copy group for a Synchronous Long Distance Remote Copy
configuration, repeat steps 2 and 3 for the second Backup Volume on list of virtual volumes.
Summary
Review the summary information , then click Finish.
Starting Remote Copy Groups
Starting a stopped Remote Copy group resumes mirroring of the selected group between systems.
To start a Remote Copy group:
1.
Access the Remote Copy Groups screen.
2.
In the list pane, select the stopped group(s) you wish to start.
3.
Right-click the selection and click Start Remote Copy Group(s).
The Start Remote Copy Group(s) dialog box appears.
4.
Click OK.
Stopping Remote Copy Groups
Stopping a Remote Copy group stops mirroring of the selected group between systems.
To stop a Remote Copy group:
1.
Access the Remote Copy Groups screen.
2.
In the list pane, select the group(s) you wish to stop.
3.
Right-click the selection and click Stop Remote Copy Group(s).
The Stop Remote Copy Group(s) dialog box appears.
4.
Click OK.
Syncing Remote Copy Groups
To synchronize source and backup Remote Copy groups:
1.
Access the Remote Copy Groups screen.
2.
In the list pane, select the group(s) you wish to synchronize.
Creating and Managing Remote Copy Volume Groups 203