HP XP Command View Advanced Edition Software - Manual (Page 76)

Performing Logical Group Operations 76
Figure 7-7 Detailed Information – LDEV-Number Panel
Table 7-1 describes the information displayed on the Detailed Information – LDEV-number panel.
Table 7-1 LDEV-Number Panel Detailed Information
Item Description
LDEV Logical device number. For the LUSE volume, the LDEV numbers of logical devices
that make up the LUSE volume are displayed in the dropdown list. Detailed
Information
Type Displays the LDEV type. This item is displayed only for StorageWorks
XP12000/XP10000.
ACP Displays the array control processor.
Array Group Displays the array group number.
RAID Level Displays the RAID level.
Capacity Displays the logical device capacity.
EMU Type Displays the emulation type (StorageWorks XP Disk Array;emulation-type x number-of-
LDEVs is shown for a LUSE volume).
Copy Type Displays the copy type: Business Copy XP, Continuous Access XP, Snapshot XP, or
Continuous Access XP Journal.
Volume Attr Displays the volume attribute.
CMD DEV Displays the command device status.
LDEV Displays the logical device number. Path
Information
Port/HSD/LUN Displays the port (cluster+port number), host storage domain (HSD) nickname, and
logical unit number. The host storage domain (HSD) is displayed only for StorageWorks
XP12000/XP10000 and XP1024/XP128.
Port/LUN Displays the port (cluster+port number) and logical unit number. This item is not
displayed for StorageWorks XP12000/XP10000 and XP1024/XP128.
Port SLPR Displays the SLPR number of the port. This item is only displayed for a StorageWorks
XP12000/XP10000 that can use Disk/Cache Partition.
Group Displays the name of the storage group to which the path belongs.
Host Displays host-name: World-Wide-Name.