HP XP Command View Advanced Edition Software - Manual (Page 37)

Preparing for and Starting Operations 37
To log in to Device Manager:
1. Launch the web browser, and enter the URL for the Device Manager server:
http://Device-Manager-server-address:port-number/DeviceManager/
Device-Manager-server-address
= IP address or host name of the Device Manager server, such
as “localhost”
port-number
= port number of the Common Web Service (default = 23015)
NOTE: Use https and port 23016 (default) for SSL. For details on port numbers, refer to the HP
StorageWorks Command View XP Advanced Edition Device Manager Server Installation and
Configuration Guide.
The values in Device-Manager-server-address and port-number are the values that were
specified during the installation. For details, refer to the HP StorageWorks Command View XP Advanced
Edition Device Manager Server Installation and Configuration Guide.
If the IP address is 172.16.45.1 and the port number is 23015 (which is the default value), enter the
URL as follows:
http://172.16.45.1:23015/DeviceManager/
2. The Command View XP AE Device Manager Login panel is displayed (see Figure 4-1 ). If you are
accessing Device Manager for the first time after installation, the Please input your License Key warning
displays. Select the License button.
If the license key for this installation has already been entered, go to step 4.
3. On the Version Information for Device Manager panel (see Figure 4-2 ), register the license key of the
storage subsystem you want to manage in Device Manager. Enter the license key or specify the license
key file, and then choose the Save button to register the license. Then, choose the Close button. You are
returned to the Device Manager Login panel.
4. On the Device Manager Login panel, enter your user ID and password, and then select Login. The
password is case-sensitive.
5. The Command View XP AE Device Manager main window displays (see Figure 4-3 ). This window
provides access to all Device Manager functions. See section 4-5 for instructions on starting Device
Manager operations.
IMPORTANT: To operate the Device Manager correctly, the Device Manager server and Java™ GUI
versions must be the same. Check the versions by performing the following procedures:
• To check the Device Manager server version, select About in the menu bar on the Command View XP AE Device
Manager main window.
• To check the Java™ GUI version, select About in the menu bar in the physical view, or click the About button on the
user administration window.
If the Java™ GUI version is earlier than the Device Manager server version, clear the cache in Java™ Web
Start (see section
3-4-4 ), and then re-install the Java™ GUI.