HP XP Command View Advanced Edition Software User Manual
Page 101
All Storage/My Storage Operations 101
Figure 8-3
Viewing the Allocated Group for a Storage Subsystem
Select Allocate Storage to add paths to the selected LDEV(s) (see section
8-4
).
Select Unallocate Storage to remove paths from the selected LDEV(s) (see section
8-5
).
Select Move to Group to move the selected LDEV(s) to a storage group. The operations are the same as the
operations for moving storage, see section
7-6-3
).
This panel provides the filtering feature. In Filtering, specify the conditions for the LDEVs to be displayed in
Object List to filter LDEVs. When you set conditions and click Filter, filtering is performed and matching LDEVs
are displayed. When you click Show All, filtering is canceled and all LDEVs are displayed. For details about the
filtering feature, see section
5-2
. For the items where you enter the conditions for displaying filtered LDEVs,
see
Table 8-1
.
The Object List lists the LDEVs/LUs in the Open-Allocated group for the storage subsystem and displays
detailed information for each LDEV/LU (see
Table 8-1
).
In the Object List select either:
•
Select All to select all LDEVs
•
Unselect All to clear all LDEVs
The Object List has a sort feature as well. To the right of each column header are two sort buttons that let you
sort the contents in ascending or descending order. Click either button to sort the items in that column.
Table 8-1
Open-Allocated Group Information under All Storage/My Storage
Column Description
LDEV
LDEV number. The icon indicates LUN security status. For LUN expansion or LUSE, only a
representative LDEV number is displayed.
Select the link to display the Detailed Information panel for the LDEV (refer to
Figure 7-7
).
This item can be used for filtering by specifying a range.
Type
Displays the LDEV type. This column is displayed for StorageWorks XP12000/XP10000 only.
•
#AT
= Internal volume to which an external volume is mapped, and the external volume consists
of SATA drives
•
#BD
= Internal volume to which an external volume is mapped, and the external volume consists
of BD drives
•
#-
= Internal volume to which an external volume is mapped, and the drive type of the external
volume is not identified
•
-
= LDEVs other than those above