HP XP Command View Advanced Edition Software - Manual (Page 104)

All Storage/My Storage Operations 104
Table 8-1 Open-Allocated Group Information under All Storage/My Storage
Column Description
Copy Type Displays copy type:
•
BC
= Business Copy XP
•
CA-XP(Sync)
= Continuous Access XP Synchronous
•
CA-XP(Async) = Continuous Access XP Extension
•
CA-XP = Continuous Access XP with unidentifiable synchronous mode*
•
Snapshot = Snapshot XP
•
CA-XP(Jrnl) = Continuous Access XP Journal
•
Unpaired
= unpaired
• Blank = pair status unknown
Use this item for filtering. You can use a partial match specification as a condition for filtering.
Copy Role Copy role: P-VOL, S-VOL, or Blank = ordinary volume.
Use this item for filtering. You can use a partial match specification as a condition for filtering.
Copy Status Copy status:
•
Simplex
= SMPL status
•
Pair
= PAIR status
•
Copying
= COPY (PD), COPY (RS), COPY (SP), or COPY status
•
Reverse-Copying = COPY (RS-R) copy status
•
Split = PSUS or PSUS (SP) copy status
•
Suspended = PSUE copy status
•
Error in LUSE = PDUB copy status
•
Suspending
= Suspending status
•
Deleting
= Deleting status
• Blank = copy status is unknown.
Use this item for filtering. You can use a partial match specification as a condition for filtering.
External Subsystem Displays the external subsystem name. This column is displayed only for StorageWorks
XP12000/XP10000.
External subsystem name = Displayed when all the following conditions are met:
• The volume is an internal volume to which an external volume is mapped.
• Device Manager has managed the external subsystem.
• If a Local user is logging in, an external volume has been allocated to the user.
External system model#External subsystem serial number = Displayed when all the following
conditions are met:
• The user is logging in as a system user.
• The volume is an internal volume to which an external volume is mapped.
• Device Manager has not managed the external subsystem.
• The model is such that External Storage XP can acquire its serial number.
External system model = Displayed when all the following conditions are met:
• The user is logging in as a system user.
• The volume is an internal volume to which an external volume is mapped.
• Device Manager has not managed the external subsystem.
• The model is such that External Storage XP cannot acquire its serial number.
Unknown = Displayed when all of the following conditions are satisfied:
• The volume must be an internal volume to which an external volume is mapped.
• You must have logged on as a Local user.
• No external volumes are assigned to the logged-in user.
Blank = Displayed when the volume is other than the internal volume to which an external volume is
mapped.
Last Updated Time of the last agent update. Displayed only when the Device Manager agent is installed on the
host.
* Displayed when the storage subsystem containing the Continuous Access XP P-VOL has not been registered in Device
Manager. Since Device Manager is able to obtain information about the synchronization mode, if the target storage
subsystem (S-VOL) is a StorageWorks XP12000/XP10000 or XP1024/XP128, CA-XP(Sync) or CA-XP(Async) displays in
this column.
8-2-2 Viewing the Unallocated Group for a Subsystem
When you select the Open-Unallocated group for a storage subsystem, the information frame displays the
following information, as shown in
Figure 8-4 :