HP XP Command View Advanced Edition Software User Manual
Page 162
Performing Storage Subsystem Operations 162
8.
In the Frame Information panel, you can select the desired array group to open the LDEV Information
panel. For details on the LDEV Information panel, see section
10-2-4
.
9.
In the physical view, select the DISKS FRONT or DISKS BACK button (DISKS button for StorageWorks
XP48) to view the disk information (see
Figure 10-17
).
Figure 10-14
Physical View for StorageWorks XP512/XP48 (Configuration)
The StorageWorks XP512/XP48 physical view (Configuration) displays the following information and buttons:
•
Model: the vendor model of the storage subsystem, such as XP512
•
Serial: the (vendor) serial number of the storage subsystem
•
IP Address: the IP address of the storage subsystem
•
Microcode SVP: the microcode level of the service processor
•
Microcode DKC: the microcode level of the disk controller
•
Configured Capacity: the configured capacity of the storage subsystem (the total capacity of all LDEVs,
not the total capacity of the physical disks). The Configured Capacity increases or decreases when
logical devices are created or deleted.
•
Total Cache: the total cache capacity of the storage subsystem
•
PORT CONTROLLERS button: opens the Port Controller panel (see section
10-3-4
)
•
Port buttons (such as E under Cluster 1 for port CL1 E): open the Port Information panel for the selected
port (see section
10-3
)