IAI America E-Con User Manual
Page 66
58
3. X-SEL-J/K/P/Q/JX/KX/PX/QX
Reference
Addresses in PLC are assigned to the remote I/O addresses that correspond to the station number set by the
rotary switch and the station number set by the PLC parameter, in steps of 16 points in order of port number.
Xnn and Ynn+1 are the addresses in PLC that correspond to the station number N.
Since 2-word (32-point) processing is made per station in PLC, the PLC remote I/O (RX/RY) addresses are
set to Xnn/Ynn+1. Refer to “Section 9. Communications with Master Station.”
(Input)
Port No.
(Output)
Port No.
(Input) (Output)
Station
No. N
Station
No. N+1