IAI America E-Con - Manual (Page 143)

135
9. Communications with Master station
8. Communications with Master station
The following is a case where X-SEL I/O port addresses are assigned from the first one of each port. This is an
example in which the two remote device stations occupied (X-SEL) are used.
8.1 Remote I/O
Two words are used for one station on the PLC side.
Master station
RCS-C/E-Con/SCON/X-SEL
Remote I/O station
(Station No. 1: one station
occupied)
X-SEL
Remote device station
(Station No. 2: Two
stations occupied)
9
9