Electro Cam PL-1746 Series - Manual (Page 80)

4-35 PLS Functions
Rate Setup
Backplane
PL-1746 Function Name SLC 500 Mapping Read/ Valid Range for Data
File Index Write
Address Number Capability
Displayed Units M0:S.51 230 R/W 0=RPM 1=BPM 2=CPM 3=IPM
Decimal Point Location M0:S.52 232 R/W 0-3
Rate Multiplier M0:S.53 234 R/W 1-1091
Rate Divisor M0:S.54 236 R/W 1-63
Screen Menu Path
MAIN SCREEN to CONFIG MENU to SECONDARY SETUP to
RATE SETUP
MPY: 1< DP: 0
DIV: 1 RPM
Displayed Units
Rate Divisor
Decimal Point Location
Rate Multiplier
Units—Move the cursor to the “Units” field and use SEL to toggle between values.
MPY & DIV—Move the cursor to MPY or DIV and use the numeric keys followed by
ENT to enter a value.
DP—Move the cursor to DP and use SEL to toggle between values.
Following are a few examples of the relationships between multiplier (MPY), divider
(DIV), decimal points (DP), actual resolver speed, and displayed resolver speed:
If And And Then And a Is
MPY DIV DP MPY/DIV Resolver Displayed
Is… Is… Is… Is… Speed Of… As…
1 2 0 .5 100 RPM 50 RPM
1 2 1 .5 100 RPM 5.0 RPM
1 2 2 .5 100 RPM .50 RPM
1 2 3 .5 100 RPM .050 RPM
1 1 0 1.0 100 RPM 100 RPM
1 1 1 1.0 100 RPM 10.0 RPM
1 1 2 1.0 100 RPM 1.00 RPM
1 1 3 1.0 100 RPM .100 RPM
2 1 0 2.0 100 RPM 200 RPM
2 1 1 2.0 100 RPM 20.0 RPM
2 1 2 2.0 100 RPM 2.00 RPM
2 1 3 2.0 100 RPM .200 RPM
Description The Rate Setup function allows you to configure the RPM display on the Main Screen.