Electro Cam PL-1746 Series - Manual (Page 39)

3-9 How to Program the PLS
PL-1746 Function Name SLC 500 Mapping Read/ Valid Range for Data Reference
File Index Write Page
Address Number Capability
Program Enable
Master Password
M0:S.106 340 R/W 0-9999 4-5
Setup Password M0:S.105 338 R/W 0-9999 4-5
Operator Password M0:S.104 336 R/W 0-9999 4-5
Per-Channel Operator Access M0:S.280- 688- R/W 0=Operator Accessible 4-5
Channels 0-31, 1 bit/channel M0:S.281 690 1=Operator Inaccessible
Operator Enable Options M0:S.107 342 R/W Bit 15-8 Reserved 4-7
Bit 7 Machine Offset
Bit 6 Group Offset
Bit 5 Default Program
Bit 4 Motion Detect/ANDing
Bit 3 Analog Outputs
Bit 2 Timed Outputs
Bit 1 Speed Comp
Bit 0 Pulses
Pulse Copy (Creates Pulse Train)
Pulse Copy Program M0:S.704 1536 R/W 0-47 4-27
Pulse Copy Channel M0:S.705 1538 R/W 0-31 4-27
Pulse Copy On (Train Start) M0:S.706 1540 R/W 0 to (Scale Factor-1) 4-27
Pulse Copy Off (Train End) M0:S.707 1542 R/W 0 to (Scale Factor-1) 4-27
Pulse Copy Count M0:S.708 1544 R/W 1 to ((Off-On)/2) 4-27
(Number of Pulses)
Pulse Copy Duration (of each pulse) M0:S.709
1546 R/W 1 to ((Off-On)/2*Count) 4-27
Pulse Copy Command/Status M0:S.710 1548 R/W* Bit 15 Error 4-27
Bit 14 Program Error
Bit 13 Channel Error
Bit 12 On > Scale Factor Error
Bit 11 Off > Scale Factor Error
Bit 10 Overlap Error
Bit 9 Duration Error
Bit 8 Reserved Bits Error
Bit 7-1 Reserved
Bit 0 Execute/Busy
Pulse Edit
Pulse Edit Program
M0:S.896 1920 R/W 0-47 4-30
Pulse Edit Channel M0:S.897 1922 R/W 0-31 4-30
Pulse Edit On (Leading Edge) M0:S.898 1924 R/W 0 to Scale Factor 4-30
Pulse Edit Off (Trailing Edge) M0:S.899 1926 R/W 0 to Scale Factor 4-30
Pulse Edit Pulse Index M0:S.900 1928 R/W 0 to (Pulse Quantity-1) 4-30
(within channel)
Pulse Edit Pulse Quantity
M0:S.901 1930 R/O 0 to (Scale Factor/2) 4-30
(within channel)
Pulse Edit Command/Status
M0:S.902 1932 R/W Bit 15 Error 4-30
Bit 14 Program Error
Bit 13 Channel Error
Bit 12 On > Scale Factor Error
Bit 11 Off > Scale Factor Error
Bit 10 Pulse Index Error
Bit 9 Reserved Bits Error
Bit 8-5 Reserved
Bit 4-1 Command (see below)
Bit 0 Execute/Busy
Quick Reference