Electro Cam PL-1746 Series - Manual (Page 75)

4-30 PLS Functions
Pulse Edit
Backplane
PL-1746 Function Name SLC 500 Mapping Read/ Valid Range for Data
File Index Write
Address Number Capability
Pulse Edit Program M0:S.896 1920 R/W 0-47
Pulse Edit Channel M0:S.897 1922 R/W 0-31
Pulse Edit On (Leading Edge) M0:S.898 1924 R/W 0 to Scale Factor
Pulse Edit Off (Trailing Edge) M0:S.899 1926 R/W 0 to Scale Factor
Pulse Edit Pulse Index M0:S.900 1928 R/W 0 to (Pulse Quantity-1)
(within channel)
Pulse Edit Pulse Quantity
M0:S.901 1930 R/O 0 to (Scale Factor/2)
(within channel)
Pulse Edit Command/Status
M0:S.902 1932 R/W Bit 15 Error
Bit 14 Program Error
Bit 13 Channel Error
Bit 12 On > Scale Factor Error
Bit 11 Off > Scale Factor Error
Bit 10 Pulse Index Error
Bit 9 Reserved Bits Error
Bit 8-5 Reserved
Bit 4-1 Command (see below)
Bit 0 Execute/Busy
Commands (bits 4-1):
0000 Read
0001 Write
0010 Increment On
0011 Decrement On
0100 Increment Off
0101 Decrement Off
0110 Increment Both
0111 Decrement Both
1000 Increment All
1001 Decrement All
1010 Change On
1011 Change Off
1100 Reserved
1101 Reserved
1110 Reserved
1111 Reserved
(continued)
Note: See Appendix for Output Pulse Programming information.