Clear-Com HLI-FBS - Manual (Page 86)

7.2 Configuring the Audio settings
To configure the audio settings for the headset:
1) In Menu mode press the left-hand Call Key and then select Audio Settings.
2) To adjust sidetone gain on the headset:
a) Select Sidetone Gain.
b) Select one of the following:
• 0dB
• - 6dB
• -12dB (default)
• -18dB
c) To confirm the selected setting, press the right-hand Call key.
Go back to the previous menu level by pressing the left-hand Call key.
3) To limit the maximum audio level that can be delivered to the headphones:
a) Select Headphone Limit.
b) Select one of the following:
• Off
• +6dB
• 0dB (default)
• - 6dB
c) To confirm the selected setting, press the right-hand Call key.
Note: When Headphone Limit is set to anything except Off, a LIM indication will
show up at the top right of the display
Go back to the previous menu level by pressing the left-hand Call key.
4) Sidetone tracking means that the sidetone level varies according to the main volume
level. To set (or disable) sidetone tracking on the headset:
a) Select Sidetone Control.
b) Select one of the following:
• Tracking (default)
• Non-Tracking
• Disabled
c) To confirm the selected setting, press the right-hand Call key.
Go back to the previous menu level by pressing the left-hand Call key.
86 HelixNet Partyline User Guide