Clear-Com HLI-FBS - Manual (Page 176)

Menu 1 (First) > Menu 2 > Menu 3> Menu 4 (Last )
Subnet Mask IP address: xx.xx.xx.xx where x is a numeric value
Administration Software Current MS Version
IVR Version
Snx Version where n is slot number and x is the port
Update None or version list
Beltpacks Menu Lock Unlock All
Lock All
Reset Reset to Default Reset HMS
Reset Devices
Reset All
Reboot Reboot Now
Settings Save USB drive or local
Restore USB drive or file list
Diagnostics Hardware Main PCB Part: [Part_Number]
Revision: [Revision]
Serial number: [Serial number]
Slot 1 PCB
Slot 2 PCB
Slot 3 PCB
Temperature Sensor 1 Temperature in °C.
Note:
Single fan on if any sensor > 60°C.
Double fan on if any sensor > 65°C.
Double fan off if < 55°C / single fan off if < 50°C.
Sensor 2
Sensor 3
Powerlines Powerline 1
Powerline 2
Status: [OK or BUSY (according to responses to MME
requests)].
DMC:[MAC of powerline modem]
HMC: [MAC of local blackfin processor]
Beltpacks: [# of beltpacks detected by powerline modem]
Collision rate: [Percentage (0% when operating normally)]
Error rate: [Percentage (0% when operating normally)]
Volts: [Voltage]
176 HelixNet Partyline User Guide