2 configuring relay outputs – Clear-Com HLI-FBS User Manual
Page 56
4.5.2
Configuring Relay outputs
To configure the Control I/O for Relay outputs:
1)
In Menu mode, select Control I/O.
2)
From the second menu, select Outputs.
3)
From the third menu, select one of the four available Relay outputs:
• Relay 1
• Relay 2
• Relay 3
• Relay 4
4)
From the fourth menu, select one of the following:
• None (default)
• Call Key 1
• Talk Key 1
• Call Key 2
• Talk Key 2
• Call Key 3
• Talk Key 3
• Call Key 4
• Talk Key 4
• SA Key
Note:
The number of the key relates to the keyset to which it belongs (for example,
Call Key 1 is the Call key for the first keyset / display screen).
5)
To confirm the selected setting, press the rotary control.
56
HelixNet Partyline User Guide