Clear-Com HLI-FBS - Manual (Page 116)

To use a headset to talk and listen to connected intercom users, devices and systems:
4) Connect the headset, using the headset connector (4-pin XLR–M) on the far left of
the front panel.
The Headset key is automatically activated. Incoming audio is routed to the headset
instead of the loudspeaker.
Note: For the location of the headset connector and the headset key, see Table
2-24 Key to Speaker Station front panel Table 2-3 Key to Main
Station/Remote Station front panel diagram.
To configure audio settings for the headset, see 6.2.1 Audio settings for the
headset
5) To talk to other intercom users and devices:
a) Press the appropriate Talk key.
When the microphone (gooseneck or headset) is live, the Mic key is activated
automatically.
b) Speak into the microphone.
6) To adjust the volume level of incoming audio to the headset:
a) Adjust the volume of all incoming audio by turning the loudspeaker rotary
control [Main]. The control is located to the left of the loudspeaker.
b) Adjust the volume of the Program Feed using the PGM rotary control.
12.1.1 Switching between the headset mic and the gooseneck mic
When both a Headset microphone and a gooseneck microphone are connected, press the
Headset key to activate the headset microphone, and press the Mic key to activate the
microphone.
Tip:
To find out more about Clear-Com accessories, including headsets and gooseneck
microphones, see http://www.clearcom.com/product/accessories.
12.2 Entering and exiting Menu mode
Use Menu mode to:
• Configure the settings for the Speaker Station, including channel and audio settings.
• Administrate the system, monitor system performance and diagnose system issues.
In Menu mode, the display screens display the four levels of menu. The menu hierarchy
proceeds left to right:
• The top level menu is presented in the first screen (left on the front panel).
• The second level menu is presented in the second screen (right on the front panel).
116 HelixNet Partyline User Guide