Clear-Com HLI-FBS - Manual (Page 74)

b) From the fourth menu, select one of the following:
• Unmute (default)
• Mute
• [SA Mode]
c) To confirm the selected setting, press the rotary control.
5) To associate one of the four available channels (or to disable channels associations)
with the selected port:
a) From the third menu, select Channel Assign.
b) From the fourth menu, select one of the following:
• Disabled (default)
• Channel A
• Channel B
• Channel C
• Channel D
Note: When linking is enabled on the Main Station, there will be more than four
channels.
c) To confirm the selected setting, press the rotary control.
5.1.5 Audio settings for Hot Mic Output
To configure the audio settings for the Hot Mic Output, see 4.2.6 Audio settings for the Hot
Mic Output.
Note: This does not apply to the Remote Station in expansion mode.
5.1.6 Audio settings for the Front Panel
To configure the audio settings for the Front Panel, see 4.2.7 Audio settings for the Front
Panel.
Note: This does not apply to the Remote Station in expansion panel mode.
5.2 Selecting Station Settings
5.2.1 Setting Preferences
To set the Preferences:
1) In Menu mode, select Station Settings and then Preferences.
2) To give the station a name:
a) From the third menu, select Station ID, and enter a station ID with a
maximum of 10 alphanumeric characters:
b) To confirm the selected setting, press the rotary control.
74 HelixNet Partyline User Guide