Clear-Com HLI-FBS - Manual (Page 80)

5.6.5 Saving and restoring the software settings.
To save or restore the software settings:
1) In Menu mode, select Administration and then Settings.
2) To save, in the third menu, select Save. Once you select Save you should not
remove the USB stick right away. Depending on the USB stick it might take up to 5
seconds to complete.
a) In the fourth menu, select between saving to a USB stick or saving locally.
3) To restore, in the third menu, select Restore.
a) In the fourth menu, select between restoring from a USB stick or restoring
from a list of files.
5.7 Diagnostics
The Diagnostics menus help you to monitor the performance of the Remote Station and
diagnose possible system issues.
5.7.1 Viewing powerline information and status
To view line information and status:
1) In Menu mode, select Diagnostics and then Powerlines.
2) From the third menu, select Powerline 1.
3) The fourth menu displays the status and other measures / information for the
powerline. The status of the powerline is either Ok [operating normally], Busy or
Error.
For more details of the information displayed, see 16 Menu maps.
Note: Powerline status is also indicated by the powerline LEDS on the front panel.
Green LED = Ok
Amber LED = Busy
Red LED = Error
For more information about powerline diagnostics, see 18 Troubleshooting.
5.7.2 Viewing network information
To view network status information:
1) In Menu mode, select Diagnostics and then Network.
2) To view status information about the powerline:
a) From the third menu, select Powerline.
b) On the fourth menu, the IP address is given.
80 HelixNet Partyline User Guide