Clear-Com HLI-FBS - Manual (Page 34)

3 Installing HelixNet Partyline
This chapter describes how to install your HelixNet Partyline system. It also provides basic
guidance on planning your installation.
Tip:
For guidance on connecting HelixNet Partyline to other systems, using the optional interface
modules, see 13 Connecting to Other Intercom Systems.
Do not plug any non-approved equipment into HelixNet Partyline.
HelixNet Partyline operates at different voltage levels than analog two-wire
partyline systems. Do not plug any analog two-wire partyline equipment into
the HelixNet partyline ports, as this may cause damage.
For more safety instructions, see 1.1 Important Safety instructions.
34 HelixNet Partyline User Guide