Clear-Com HLI-FBS - Manual (Page 102)

9.1 Pairing scenarios
There are various topologies that you can create. Some of these are illustrated below.
9.1.1 Digital Intercom
Remote and Speaker Stations have Digital Intercom 3-pin XLR connectors (female and male)
and can connect to Main Stations along with Beltpacks.
Note: A Remote or a Speaker Station draws current equivalent to three Beltpacks when the
loudspeaker is in use. If the Remote or Speaker Station is locally powered using a power
supply, it does not draw current from the digital intercom line.
1) Connect an XLR cable from a Main Station to the Remote or Speaker Station.
2) Power up the Main Station and verify that the Line 1 and Line 2 status LED are green
on Main Station.
3) On a Remote Station you can verify that the Line status LED is steady green.
HMS-4X
HRM-4X
Line 2
Line 1
HKB-2X
HKB-2X
102 HelixNet Partyline User Guide