Clear-Com HLI-FBS - Manual (Page 85)

7 Configuring and managing the HBP-2X Beltpack
This chapter describes how to configure the settings and manage the HBP-2X Beltpack using
Menu mode. It also shows you how to monitor and diagnose performance issues, using the
Diagnostics menus.
Tip:
For a quick reference to the Main Station menus, see 16 Menu maps.
7.1 Using the Menus
To place the beltpack in Menu mode, press the Menu key on the top of the beltpack.
Note: The Beltpack menu comes up in the Beltpack Settings menu by default.
Note: If Menu mode is locked on the beltpack, you must unlock the menus (for all beltpacks) on the
HMS-4X Main Station before you can enter the menu. See 4.7Administration.
7.1.1 Configuring settings
To configure settings:
1) For each menu, turn either of the side-mounted rotary controls to scroll the menu
items. Turn the rotary control:
• Counter-clockwise to scroll up the menu items.
• Clockwise to scroll down the menu items.
Off-screen menu items are indicated with arrows at the top and / or bottom of the
display screen.
Back (with an arrow pointing left) indicates a previous level of menu.
To return to the previous level of menu, press the left-hand Call key.
An arrow pointing right indicates another level of menu under that menu item.
To go to the next level of menu, press the right-hand Call key.
Selected menu items are highlighted in solid yellow.
2) The final level of menu (the second or third display screen) displays the settings that
relate to your previous menu choices (system features or functionality).
The current setting is indicated by a dotted box around the menu item
When you have selected a setting, press the right-hand Call key to enable the
setting on the Main Station.
7.1.2 Exiting Menu mode
To exit Menu mode on the beltpack, do either of the following:
• Press the Menu key.
• Wait until Menu mode times out. If you fail to press any key on the beltpack for 20
seconds, the display screen reverts to showing the standard channel information.
85 HelixNet Partyline User Guide