Clear-Com HLI-FBS - Manual (Page 52)

4.3.6 Setting key brightness
By default, the front panel keys are set to High / Low. To set the brightness of all front panel
keys:
1) In Menu mode, select Station Settings and then Display.
2) From the third menu, select Key Brightness.
3) From the fourth menu, select one of the following brightness settings:
Key(s) Description
High / Low The default setting.
Keys are lit bright when active and lit dim when inactive.
High / Off Keys are lit bright when active and are unlit when inactive.
Low / Off Keys are lit dim when active and are unlit when inactive.
Off / Off Keys are unlit, whether or not they are active or inactive.
Table 4-2: Setting key brightness
4) To confirm the selected setting, press the rotary control.
4.3.7 Setting the screensaver
The screensaver features the channel label and is enabled by default. The display screens
enter screensaver mode when the main station has been inactive for 10 minutes.
Tip:
To exit screensaver mode, press any key on the front panel.
To enable or disable the screensaver:
1) In Menu mode, select Station Settings and then Display.
2) From the third menu, select Screensaver.
3) From the fourth menu, select either:
• Enabled (default)
• Disabled
4) To confirm the selected setting, press the rotary control.
52 HelixNet Partyline User Guide